DMX512A USB DMX Controller
Use your laptop to control your lights with this highly portable USB to DMX controller. It allows control over all DMX 512 channels and is usable with industry standard freely available DMX control softwares. Most compact DMX controller in market. Click here for further details.
Use your laptop to control your lights with this highly portable USB to DMX controller. It allows control over all DMX 512 channels and is usable with industry standard freely available DMX control softwares. Most compact DMX controller in market. Click here for further details.
DMX512A USB DMX Controller Module
XLR
USB DMX Controller with full 512 channel support in module format for easy integration in your own housing. The product uses Neutrik XLR connector for DMX output. Click here for further details.
USB DMX Controller with full 512 channel support in module format for easy integration in your own housing. The product uses Neutrik XLR connector for DMX output. Click here for further details.
DMX512A USB DMX Controller Module Screw
Terminals
USB DMX Controller with full 512 channel support in module format for easy integration in your own housing. The product uses screw terminals for DMX ouput. Click here for further details.
USB DMX Controller with full 512 channel support in module format for easy integration in your own housing. The product uses screw terminals for DMX ouput. Click here for further details.
3 Pin DMX Terminator with
Indicator
Install the terminator indicator at the end of the DMX chain and immediately observe DMX signal activity. This indicator is designed to provide 120 Ohm termination so leave it plugged in to the DMX chain for reliable operation. A very useful tool for a lighting engineer. Click here to buy.
Install the terminator indicator at the end of the DMX chain and immediately observe DMX signal activity. This indicator is designed to provide 120 Ohm termination so leave it plugged in to the DMX chain for reliable operation. A very useful tool for a lighting engineer. Click here to buy.
3 Pin 120 Ohm DMX
Terminator
Without a terminator the DMX signal will reflect off the last DMX fixture and cause corruption in the DMX data stream and will make the lights freeze or show erratic behaviour. The DMX terminator when fitted to the last fixture in the DMX chain will remove the signal reflections and make the setup reliable. The Terminator is fitted with 120 Ohms 1% terminator resistor as specified by the DMX-512 standard. Click here to buy.
Without a terminator the DMX signal will reflect off the last DMX fixture and cause corruption in the DMX data stream and will make the lights freeze or show erratic behaviour. The DMX terminator when fitted to the last fixture in the DMX chain will remove the signal reflections and make the setup reliable. The Terminator is fitted with 120 Ohms 1% terminator resistor as specified by the DMX-512 standard. Click here to buy.